← Full guide: Samsung Dryer Not Heating — Safe Airflow and Cycle Checks
Samsung dryer spins normally but has absolutely no heat
First prove this is true no-heat on a heat-enabled cycle.
Start here
First prove this is true no-heat on a heat-enabled cycle. Samsung recommends Time Dry with Eco Dry off; if there is still zero warmth, check power/vent/error conditions before parts.
Check these first
- Use Time Dry and disable Eco Dry.
- Check for dryer error codes.
- Reset the double-pole breaker fully OFF then ON if safe and permitted.
- Inspect plug/cord/outlet for heat or damage without opening live wiring.
Fix it in this order
- Confirm zero heat on a heat cycle.
- Rule out cycle setting.
- Reset breaker once.
- If no heat remains, have a qualified person verify full supply and then heater/thermal/control circuit.
Evidence to keep
- Cycle used
- Any error code
- Breaker/power symptom
- Repair history
Do not make it harder
- Live voltage testing unless qualified
- Replacing an element before supply/airflow diagnosis
How you know it is fixed
- Dryer heats consistently on Time Dry and completes normal loads.
If the obvious fix does not work
- If there is some warmth, move to “not hot enough/long dry time” instead of true no-heat.
- If a new element/fuse fails quickly, investigate airflow and the cause rather than replacing the same part again.
If this still isn't resolved
- Electrician for supply issue
- Samsung/appliance service for internal heater/control fault
Sources for this path
Use these references to confirm provider-, model-, policy-, or jurisdiction-specific details before an irreversible step.
Need the complete context?
This page solves one branch. The parent guide covers the full decision, edge cases, alternatives, and related checks.