← Full guide: LG Washer Error Codes: Read the Code Before Replacing Parts
LG washer IE error: washer will not fill with water
IE means the tub did not reach the required water level in time.
Start here
IE means the tub did not reach the required water level in time. Check the supply taps and hoses first; if supply is good, the inlet valve/sensing path needs service.
Check these first
- Confirm water supply is on.
- Check inlet hoses for kinks/freeze.
- Confirm inlet screens are not blocked if the model instructions allow inspection.
Fix it in this order
- Open the taps fully.
- Straighten/thaw hoses safely.
- Retry a fill.
- If household water is good but IE returns, service the inlet valve/water-level system.
Evidence to keep
- IE code
- Which cycles fail
- Water-supply result
Do not make it harder
- Running a frozen hose
- Removing pressurized hoses without turning water off
How you know it is fixed
- The washer fills to the expected level and continues the cycle without IE.
If the obvious fix does not work
- If only hot or cold cycles fail, isolate the affected supply/inlet side.
- If IE started after moving the washer, check hose routing and tap position before service.
If this still isn't resolved
- LG service for a persistent IE with good water supply
Sources for this path
Use these references to confirm provider-, model-, policy-, or jurisdiction-specific details before an irreversible step.
Need the complete context?
This page solves one branch. The parent guide covers the full decision, edge cases, alternatives, and related checks.