Use critical-load tiers when the budget is limited

Start here

For “Use critical-load tiers when the budget is limited”, divide loads into Tier 1, Tier 2 and optional. Tier 1 might be lights, router, refrigerator and medical equipment. Tier 2 could add fans and selected sockets. Optional loads such as air conditioning or water heating can stay off during outages.

What applies to this exact problem

Check these first

• Verify the installation after commissioning: Test an actual outage while the installer is present. Confirm essential circuits transfer correctly, the inverter does not overload during motor startup and monitoring shows expected battery state. Ask for shutdown and emergency instructions.
• Size the first battery/inverter system for Tier 1, then check the incremental cost of Tier 2.
• Verify the installation after commissioning Test an actual outage while the installer is present.

Fix it in this order

1. Verify the installation after commissioning: Test an actual outage while the installer is present. Confirm essential circuits transfer correctly, the inverter does not overload during motor startup and monitoring shows expected battery state. Ask for shutdown and emergency instructions.
2. Size the first battery/inverter system for Tier 1, then check the incremental cost of Tier 2.
3. Verify the installation after commissioning Test an actual outage while the installer is present.
4. Confirm essential circuits transfer correctly, the inverter does not overload during motor startup and monitoring shows expected battery state.
5. Ask for shutdown and emergency instructions.
6. Keep a simple maintenance log with battery alarms, firmware updates and unusual capacity changes.

Evidence to keep

• Signed quote and scope — keep it with the evidence for “Use critical-load tiers when the budget is limited”.
• Module/inverter serials and warranty — keep it with the evidence for “Use critical-load tiers when the budget is limited”.
• DISCOM/portal application IDs — keep it with the evidence for “Use critical-load tiers when the budget is limited”.
• Generation data, photos, and installer tickets — keep it with the evidence for “Use critical-load tiers when the budget is limited”.

Do not make it harder

• Paying the final amount before checking agreed milestones For “Use critical-load tiers when the budget is limited”, that can hide whether the underlying issue is actually resolved.
• Assuming low generation is automatically a bad panel For “Use critical-load tiers when the budget is limited”, that can hide whether the underlying issue is actually resolved.
• Treating installer completion as DISCOM/subsidy completion For “Use critical-load tiers when the budget is limited”, that can hide whether the underlying issue is actually resolved.

How you know it is fixed

• The official record and your real-world result agree for “Use critical-load tiers when the budget is limited”.
• You have enough written evidence to prove the issue is finished if it returns later for “Use critical-load tiers when the budget is limited”.

If this still isn't resolved

1. Installer/vendor grievance State the unresolved issue explicitly: “Use critical-load tiers when the budget is limited”.
2. DISCOM/portal grievance route State the unresolved issue explicitly: “Use critical-load tiers when the budget is limited”.
3. Consumer forum or other official remedy where appropriate State the unresolved issue explicitly: “Use critical-load tiers when the budget is limited”.

Parent-guide references

These references support the parent guide and escalation context. Verify provider-, model-, policy-, or jurisdiction-specific details before an irreversible step.

• MNRE
• Central Electricity Authority
• PM Surya Ghar portal
• National rooftop solar portal

Need the complete context?

This page solves one branch. The parent guide covers the full decision, edge cases, alternatives, and related checks.

Open the full guide