← Full guide: PM Surya Ghar Subsidy: Eligibility, Application, and Payment Checklist

Use a no-subsidy payback as your safety test

Take the total installed system cost and calculate annual savings using conservative generation and your real electricity tariff.

Start here

Take the total installed system cost and calculate annual savings using conservative generation and your real electricity tariff. Then calculate the payback without subsidy. If the project is still reasonable, the subsidy improves a sound investment. If the project works only because a vendor assumes immediate subsidy, reconsider the quote.

What applies to this exact problem

Take the total installed system cost and calculate annual savings using conservative generation and your real electricity tariff. Then calculate the payback without subsidy. If the project is still reasonable, the subsidy improves a sound investment. If the project works only because a vendor assumes immediate subsidy, reconsider the quote.

Also model lower generation caused by shade, downtime or equipment performance. A system that is oversized relative to daytime consumption may export more energy at a value different from retail electricity saved. Use the current DISCOM rules for your area rather than a national average.

Monitor the first year

Save monthly generation and electricity bills. Compare actual output with the proposal after accounting for season. Large unexplained underperformance should be raised during warranty while evidence is fresh.

The scheme can reduce upfront cost, but long-term value comes from a safe system that generates as expected for years. Design quality, equipment support and monitoring matter after the subsidy has been paid.

Check these first

  • Monitor the first year: Save monthly generation and electricity bills. Compare actual output with the proposal after accounting for season. Large unexplained underperformance should be raised during warranty while evidence is fresh.
  • Then calculate the payback without subsidy.
  • Use the current DISCOM rules for your area rather than a national average.

Fix it in this order

  1. Monitor the first year: Save monthly generation and electricity bills. Compare actual output with the proposal after accounting for season. Large unexplained underperformance should be raised during warranty while evidence is fresh.
  2. Then calculate the payback without subsidy.
  3. Use the current DISCOM rules for your area rather than a national average.
  4. Compare actual output with the proposal after accounting for season.

Evidence to keep

  • Signed quote and scope — keep it with the evidence for “Use a no-subsidy payback as your safety test”.
  • Module/inverter serials and warranty — keep it with the evidence for “Use a no-subsidy payback as your safety test”.
  • DISCOM/portal application IDs — keep it with the evidence for “Use a no-subsidy payback as your safety test”.
  • Generation data, photos, and installer tickets — keep it with the evidence for “Use a no-subsidy payback as your safety test”.

Do not make it harder

  • Paying the final amount before checking agreed milestones For “Use a no-subsidy payback as your safety test”, that can hide whether the underlying issue is actually resolved.
  • Assuming low generation is automatically a bad panel For “Use a no-subsidy payback as your safety test”, that can hide whether the underlying issue is actually resolved.
  • Treating installer completion as DISCOM/subsidy completion For “Use a no-subsidy payback as your safety test”, that can hide whether the underlying issue is actually resolved.

How you know it is fixed

  • The official record and your real-world result agree for “Use a no-subsidy payback as your safety test”.
  • You have enough written evidence to prove the issue is finished if it returns later for “Use a no-subsidy payback as your safety test”.

If this still isn't resolved

  1. Installer/vendor grievance State the unresolved issue explicitly: “Use a no-subsidy payback as your safety test”.
  2. DISCOM/portal grievance route State the unresolved issue explicitly: “Use a no-subsidy payback as your safety test”.
  3. Consumer forum or other official remedy where appropriate State the unresolved issue explicitly: “Use a no-subsidy payback as your safety test”.

Parent-guide references

These references support the parent guide and escalation context. Verify provider-, model-, policy-, or jurisdiction-specific details before an irreversible step.

Need the complete context?

This page solves one branch. The parent guide covers the full decision, edge cases, alternatives, and related checks.

Open the full guide